View Full Version : Metal Shear Resharpening
Lenin Alvarez
04-24-2013, 1:07 PM
We currently have around 5 table top metal shears to cut all of our engraving stock, a couple of them are getting dull and they need to get resharpened.
We used to send it to a company in Carrollton, TX (we are in the DFW area) but the company is not longer in business, any of you guys know where to send the blades to get resharpened, something local would be great, if not anything will work at this point.
Thanks
Martin Boekers
04-24-2013, 1:41 PM
You might check for knife shapening in your area or stop by a lawnmower repair shop.
Most that sharpen are set up to sharpen different items.
Gary Hair
04-24-2013, 2:03 PM
I sent mine to Edge Rite Tool Co and they did a fantastic job and the turnaround was very fast. http://edge-rite.com/
If you use a local sharpener make sure they know the correct angles to sharpen for metal vs plastic - some do and some don't. edge-rite does...
Gary
Frank barry
04-24-2013, 2:39 PM
Hi Leine
Try Bruce sharpening he should be able to do it if not he would recommend somone near you he has a website
Mark Sipes
04-24-2013, 2:53 PM
A shop that deals with saw blade repair/sharpening industrial
Veiga Knife Sales & Sharpening (http://www.yellowpages.com/dallas-tx/mip/veiga-knife-sales-sharpening-8187882?lid=8187882) (214) 821-3240 2929 Gaston Ave, Dallas, TX 75226 Near East Dallas
KSW Corp (http://www.yellowpages.com/dallas-tx/mip/ksw-corp-2451224?lid=2451224) 2970 Blystone Ln # 101, Dallas, TX 75220 (214) 350-1943
Evans Grinding Co (http://www.yellowpages.com/dallas-tx/mip/evans-grinding-co-1758286?lid=1758286) 3308 Swiss Cir, Dallas, TX 75204 (214) 823-9450
and the list goes on
Sheffield Saw & Tool Co., Inc. 1325 Whitlock Lane Suite 310 Carrollton, Texas 75006 972-820-9705
Cozzini Brothers Inc 2530 Tarpley Rd Ste 500, Carrollton, TX 75006 (972) 416-0001
Read more: http://www.magicyellow.com/category/sharpening_service/carrollton_tx.html#ixzz2RPOlPI6q
Lenin Alvarez
04-24-2013, 6:08 PM
Thank you guys, that give me plenty of options... saved me a lot of time looking.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.