PDA

View Full Version : Camtech Laser L5 engraving issue



Miguel Pinho
04-22-2013, 8:50 AM
Hello
My L5 Laser Master is engraving a little bit blurred ( notice the "S" letter on the attached image).
Also, is making a weird lined engraving.
Can someone tell me what is causing this problem?

Thanks

Regards
Miguel Pinho
260638

Dan Hintz
04-22-2013, 9:59 AM
Loose optics... loose belt/gear...

Miguel Pinho
04-22-2013, 10:07 AM
You mean this? (Please see the attached image)
260640

Dan Hintz
04-22-2013, 12:24 PM
Make sure the gears are not slipping or moving back and forth on the axle (often from a loose grub screw). Then check every optic mount to make sure they're solid.