dave cox
04-21-2013, 8:57 PM
Hi, I am in the process of purchasing a barrel polishing set up and looking for advice with what mediam to use.
I etch commercial stainless steel items that need deburring and am also looking to make some ss jewlery that will need a good finish so any advice would be gratefully recieved.
Should I use garnet, glass beads, or stainless steel shot, what grade and with or without water of some other fluid. Also other additions like barrel bright.
I look forward to hearing from the SMC experts.
I etch commercial stainless steel items that need deburring and am also looking to make some ss jewlery that will need a good finish so any advice would be gratefully recieved.
Should I use garnet, glass beads, or stainless steel shot, what grade and with or without water of some other fluid. Also other additions like barrel bright.
I look forward to hearing from the SMC experts.