PDA

View Full Version : Handheld CNC



Joe Hillmann
04-18-2013, 4:55 PM
Here is a link to a handheld cnc. It looks like the operator just has to move the router in the general direction the screen tells you to move it and the CNC inside the router does the rest. If you go to about 1:30 on the video it gives a pretty good view of what is happening inside of the router. Due to all the components of it I would bet that it is actually more expensive then a homemade table top CNC.

http://blog.ponoko.com/2012/09/27/gps-for-your-power-tools/#more-39355

Jerome Stanek
04-18-2013, 6:16 PM
and not as accurate