steven c newman
04-11-2013, 2:39 PM
An old plastic tool box from the old Pole barn Shop I had last year. Seems it held a few surprises inside259723There were three handsaw totes, a full set of Lathe chisels for my lathe, and259724four versions of this:eek: little guy. one was a chisel plane that used a 1/2" wide chisel, another was a 1/2" wide cove plane ( Hollow? or Round?) along with a 3/8" cove plane. I also had a 3/8" wide, "V" groove cutter of a plane. Maybe I should look through a few of my other boxes?:confused:
Another, better look at that "V" groover?259725259726 Still need to make new wedges for the other ones. This one works real nicely, once I remembered to start on the correct end of a board259727Needed to set up a "fence" first. The outside edge was done in a couple passes with a hand plane. :D
Another, better look at that "V" groover?259725259726 Still need to make new wedges for the other ones. This one works real nicely, once I remembered to start on the correct end of a board259727Needed to set up a "fence" first. The outside edge was done in a couple passes with a hand plane. :D