PDA

View Full Version : laserworks 6.0 rotary settings



Diane Bloomingdale
04-08-2013, 6:18 PM
i cannot get the rotary table to work on my 50watt shenhui laser. when i plug it in to the y axis with the power off and turn on the machine the table has power and moves but the machine takes about 1 minute to reset. i go to laserwork and click enable rotary engrave , set the diameter off the piece , click start. laser head moves ok but rotary table does not move. i am pretty sure its just a setting but i dont know what to change . with the buttons on the keypad the table will rotate but its kind of erratic . anybody can help me with settings i very much appreciate. just got this and am trying to learn. thank you in advance

Diane Bloomingdale
04-11-2013, 7:10 AM
i found the problem . one of the wires in the rotary table plug was not soldered. now it works fine . easy fix but hard to find. i kept thinking it was a setting in the software . chinese quality control . thanks for looking .