Looking for a tool , mandrel with cylinder with slits in it that paper comes out of

[Craig D Peltier]

Im looking for a mandrel that fits on a drill that has a metal drum on it with 4 slits that bristles stick out off, you open up the cylinder and put this rolled sandpaper in it the centrifugal force sends the paper out the slits so you sand irregular edges etc. Dont know where to buy it or the name of it?

Thanks

[Rick Lizek]

Brush head sanders...
I've used many types of sanders for profile work over 40 years in custom shops and factories and these are fair to ok with certain types of woods and profiles. Don't expect remove heavy chatter from oak or pine. You can also lose fine detail. Show more specifically what you are trying to and there are other options. More detail is better. In the future you should post what you need to do instead of what you think you need...

[John Lanciani]

https://encrypted-tbn1.gstatic.com/images?q=tbn:ANd9GcTJbTxdJPvppD51Vaa07VzE_G5oww5X3 U2nAnpKdimglbVls8PF

Sand-o-flex. Google is your friend, prices seem to be all over the map.

[Craig D Peltier]

Live table edges, trying not to loose the original detail except any bark left of course. The sand o flex is what i was thinking about.


Brush head sanders...
I've used many types of sanders for profile work over 40 years in custom shops and factories and these are fair to ok with certain types of woods and profiles. Don't expect remove heavy chatter from oak or pine. You can also lose fine detail. Show more specifically what you are trying to and there are other options. More detail is better. In the future you should post what you need to do instead of what you think you need...

[Stephen Cherry]

here's another
http://www.sand-rite.com/b-12.html