Scott Shepherd
03-29-2013, 7:23 PM
Just a quick heads up for any Universal power users. If you used Image Enhancements, mainly "tuning" to get your text razor sharp on various materials, the latest driver, 5.35.57.04 scrapped that slide bar and made it into a wizard that's in the system tab. Instead of having the tuning all saved and stored individually with each material you have saved, it now is a "one size fits all" and you'll have to tune materials over and over and over and over and over, because it only holds 1 setting and once you put another material in that might have a different tuning value, you have to run the tuning wizard again, and you'll have to run it once again when you switch back to the other materials you use.
They took something that gave complete and total control and wiped that out.
The latest driver that doesn't do this is 5.35.56.08 if you need to roll back. I was asked to email my concerns to support so they could start documenting customers that wanted the feature back the way it was, not flushing the years of saved experience down the toilet without asking. We've spent 100's of hours over the years tuning materials, now that's partially gone in the latest release, meaning we'll have to start over again.
So if you use the tuning feature, please take a couple minutes and email support and tell them you don't want the standard tuning method removed from the software. Just because a new user needs a wizard, doesn't mean you should remove it from people that aren't new users and do understand it.
Thanks for your time!
They took something that gave complete and total control and wiped that out.
The latest driver that doesn't do this is 5.35.56.08 if you need to roll back. I was asked to email my concerns to support so they could start documenting customers that wanted the feature back the way it was, not flushing the years of saved experience down the toilet without asking. We've spent 100's of hours over the years tuning materials, now that's partially gone in the latest release, meaning we'll have to start over again.
So if you use the tuning feature, please take a couple minutes and email support and tell them you don't want the standard tuning method removed from the software. Just because a new user needs a wizard, doesn't mean you should remove it from people that aren't new users and do understand it.
Thanks for your time!