PDA

View Full Version : Any problems using Corel X6 with a Universal Laser?



David Dustin
03-29-2013, 12:44 PM
We need to upgrade our Corel and wanted to make sure there were no issues with X6 and the Universal Laser Systems.

Best regards,
David

Brian Terry
03-29-2013, 12:54 PM
We need to upgrade our Corel and wanted to make sure there were no issues with X6 and the Universal Laser Systems.

Best regards,
David

I have never had any issues with my Universal with X6

David Dustin
03-29-2013, 1:00 PM
Groovy, thanks

Kevin L. Waldron
03-29-2013, 3:10 PM
David,

Can't speak for everyone else but we have several copies of vs 6 and have found it to be slow and somewhat buggie on a 64 bit machine. We further found that it didn't like some of our high end Nvidia video cards. ( we do have all the latest video, Microsoft, and Corel updates... actually crashed it twice yesterday..... We also have Corelcad and Corel PaintPro X5..... they perform better than Coreldraw V6....) We have 2 Universal lasers and are still for the most part running vs 5.

Blessings,

Kevin

Zvi Grinberg
03-31-2013, 8:21 AM
We were selling ULS machines with Corel Draw X6 from the day it came out (and in the past V12, X3, X4, X5).
Our custimers are happy and do not seem to have any version sepcific issues, if at all.

Zvi

Tamsyn Michael
04-05-2014, 4:36 AM
We use CorelDraw X6 at work (Laser Engraving Production company) with our ULS and it works flawlessly.