Delta 14" Band Saw 28-203 Fence ?

[Jim Barrett]

I just picked up a very nice little used 28-203 Delta BS 3/4 hp. (1991 vintage) Stock, no riser which is fine...no fence or miter gauge. Looking for recommendations for a fence...Kreg, Grizzly, Carter, etc, etc...? Will not be doing any major resawing with this saw...waiting for the Aggazani line to reappear end of summer...most likely will be used for scrolling and small rips, maybe some small dovetails. I like to use a band saw for cutting the tails on my dovetails. Any suggestions would be much appreciated.
Will get some pics up once I get the BS out of my PU Truck...long drive today to get it and my wife told me forget unloading it tonight.

Jim

[Chris Rosenberger]

I really like the Kreg Band Saw Fence with a micro adjuster.

http://www.amazon.com/Kreg-KMS7200-Bandsaw-Fence/dp/B0007VYL48/ref=as_li_wdgt_ex?&linkCode=wsw&tag=wwwnorthwinda-20

http://www.amazon.com/Kreg-KMS7215-Micro-Adjuster-Router-Fences/dp/B0007VYL52/ref=as_li_wdgt_ex?&linkCode=wsw&tag=wwwnorthwinda-20

[Bruce Wrenn]

Since this is a short term, why not make your own fence. Mark Dugenskie shows how in both his book and video on the band saw. When you get the blade tracking correctly, drift won't be a problem, unless blade is damaged.