View Full Version : I need a set of rail/stile & panel bits.
Rich Engelhardt
03-23-2013, 8:33 AM
What's a decent set that won't break the bank?
& out of the bank breakers - Whiteside, Eagle America or Freud?
Is the quality still there w/Eagle America after being taken over by MLCS?
Same goes for Freud now that they are part of Bosch?
C Scott McDonald
03-23-2013, 10:21 AM
I got a the Bank breaking Freud set and it is awesome. The quadra-cuts leave such a nice smooth cut. In fact Freud quadra-cut would be my first choice in any type bit.
Plus the Freud's have a lot of adjustment with shims so you dial the groove in for a perfect fit to the panel if you are using ply.
good luck.
Jim Mackell
03-23-2013, 10:26 AM
Freud +1 IMHO
John Schumer
03-23-2013, 10:52 AM
Sommerfelds work great for me, I have a couple different sets.
Sam Layton
03-23-2013, 12:12 PM
Rich,
Look at Infinity cutting tools. I use their shaper cutters and I am very happy with them. Infinitytools.com
Sam
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.