PDA

View Full Version : DPI in chinese machine



Mohammed Issa
03-22-2013, 8:34 PM
hello everyone,

i was wondering if anyone has figured out how to convert to DPI from the known 'interval (mm)' setting with the RDCAM software.

thanks!

Rodne Gold
03-23-2013, 2:16 AM
1 inch is 25.4mm . , so if the interval is 0.1mm , then you divide 25.4 by it
ie 25.4/0.1 = 254 dpi
if you want 300 dpi , then divide 25.4 by 300 = interval of 0.0846666666
I see if you try to enter 0.0866666 , the program defaults to 0.09 which is actually 282 dpi.

Vicki Rivrud
03-23-2013, 10:50 AM
hello everyone,

i was wondering if anyone has figured out how to convert to DPI from the known 'interval (mm)' setting with the RDCAM software.

thanks!


Here's a handy chart for dpi/scangap conversion

257980

Mohammed Issa
03-23-2013, 6:06 PM
thank you both!

that's exactly what i needed!

Roy Nielsen
03-24-2013, 2:49 PM
Thanks for the chart, Vicki.

Roy

Walt Langhans
03-24-2013, 2:52 PM
That's good info :)

@ Rodney would you mind re-posting that in the Shenui thread so it doesn't get lost?