Michael Kellough
03-21-2013, 10:44 AM
(I hope it's okay to post this here?)
I have some wide panels that need to be sanded in the NYC area.
I will bring the stuff to your shop and am willing to assist in the sanding/handling.
The biggest panel is 43-1/2" wide by 77 inches long. (all are 1-3/4" thick)
There are only four parts, two long and two half as long.
This is from an "artist designed" piece of furniture that I've been hired to re-finish.
It was finished with water based clear poly. The wood is ponderosa pine with tight knots.
There are deep scratches that have to come out so a wide belt sander is the only way
to keep the surfaces dead flat.
I'm willing to pay a high hourly rate and I think it would take two to three hours.
Send me a PM or contact info if you're interested.
I have some wide panels that need to be sanded in the NYC area.
I will bring the stuff to your shop and am willing to assist in the sanding/handling.
The biggest panel is 43-1/2" wide by 77 inches long. (all are 1-3/4" thick)
There are only four parts, two long and two half as long.
This is from an "artist designed" piece of furniture that I've been hired to re-finish.
It was finished with water based clear poly. The wood is ponderosa pine with tight knots.
There are deep scratches that have to come out so a wide belt sander is the only way
to keep the surfaces dead flat.
I'm willing to pay a high hourly rate and I think it would take two to three hours.
Send me a PM or contact info if you're interested.