Tim Bateson
03-07-2013, 8:52 PM
OK, have you ever done dozens of an item and then found a couple that were just a little bit different? I've done metal picture frames with Cermark, However tonight I have 2 - both different from one another, but neither will mark.
I even tried hitting it with 100% power and 20 speed, and then apply Cermark and laser, still nothing. Under a magnifying glass I can see where I hit it, but no Cermark will stick. One looks to maybe be chrome & that would explain it's issue, but the other is a dull brushed finish.
I even considered using CLTT, but the angle of the frames would make it impossible to properly use the heat press.
I hate telling a customer I failed and good luck finding someone else.
I even tried hitting it with 100% power and 20 speed, and then apply Cermark and laser, still nothing. Under a magnifying glass I can see where I hit it, but no Cermark will stick. One looks to maybe be chrome & that would explain it's issue, but the other is a dull brushed finish.
I even considered using CLTT, but the angle of the frames would make it impossible to properly use the heat press.
I hate telling a customer I failed and good luck finding someone else.