Uros Sovilj
02-15-2013, 3:53 AM
Hi254369254369
I have a customer that want sign table made from letters and logo that need to be cut from acrylic sheet and glue to aluminium base.
Only way i can figure out is to aply thin colour foil to acrylic and then cut out letters and logos.
Problem is that foil is PVC. Since i am aware that pvc is NO for lasering i am asking you if you will risk cutting PVC for that small job(cca 1/2 hour job) or
maybe someone have beter solution.
Regards
Uros
I have a customer that want sign table made from letters and logo that need to be cut from acrylic sheet and glue to aluminium base.
Only way i can figure out is to aply thin colour foil to acrylic and then cut out letters and logos.
Problem is that foil is PVC. Since i am aware that pvc is NO for lasering i am asking you if you will risk cutting PVC for that small job(cca 1/2 hour job) or
maybe someone have beter solution.
Regards
Uros