Question about cleaning tape encoder Epilog.

[Roger Leiva]

Hi.
You can clean this tape using Multi-coater fluid filter and lens cleaner, which supplies Epilog cleaning lenses and mirrors. Which is better?
Roger Leiva (C.R.) Helix 24 60 watt.

[Roger Leiva]

I've only used clean water applied with a cotton swab.

[Joe Hayes]

According to Epilogs website, you should use distilled water and a cotton swab. Here is a link to a video on the Epilog website - http://www.epiloglaser.com/tl_cleaning_linear_encoder.htm

[Roger Leiva]

According to Epilogs website, you should use distilled water and a cotton swab. Here is a link to a video on the Epilog website - http://www.epiloglaser.com/tl_cleaning_linear_encoder.htm

Joe, thank you very much. Enough with the video explanation.
Roger Leiva (C.R.) Helix 24.

[Dan Hintz]

You can clean this tape using Multi-coater fluid filter and lens cleaner, which supplies Epilog cleaning lenses and mirrors. Which is better?

Always be careful of the chemicals you put on that strip... many will flat out melt it.