Alan Lightstone
02-11-2013, 12:28 PM
This table edge has a complex shape. All curves, convex / concave. I went through 3 expensive router bits, and the best edge I came up with has that line going down the middle.
254109
What is the best approach to remove it? Hand sand it (worried about making curve inconsistent), use a curved card scraper, or make a custom scraper out of metal (not sure how to sharpen it, or make a custom sanding block (difficult with convex/concave curves).
254109
What is the best approach to remove it? Hand sand it (worried about making curve inconsistent), use a curved card scraper, or make a custom scraper out of metal (not sure how to sharpen it, or make a custom sanding block (difficult with convex/concave curves).