Tyler A Anderson
02-09-2013, 11:15 PM
Hello everyone,
I have been reading for a while, but haven't ever said much. I thought I would break the ice with some pictures of some planes I made. Sorry for the bad photos, but my basement is dark, and its cold outside!!
Most were made with instructions from the book Making Wood Tools by John Wilson. Its a good book, I recommend it.
The smoother and the little block plane blade were ordered from lee valley, they are the HSS blades for the wooden planes they sell.
The Razee style smoother:
Made from Bubbinga and Oak for the body, the wedge and the plugs are African Mahogany. The tapping plug is Tamboti.
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0080-1.jpg
Smoother with proof that it works:
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0075-2.jpg
A shoulder plane- actually the first plane I made:
Cherry and Oak, with Maple Plugs
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0081-1.jpg
A group photo of the Smoother, the shoulder plane, a little block plane, and a small router plane. They are in a photo with my Stanley #8 and craftsman 3732 block plane for scale. The block plane was my grandfathers, and it got me started with hand tools. It's still my favorite tool, just a pleasure to use. The little router plane was done almost entirely with hand tools, I used the drill press to drill the holes, the rest was all by hand..
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0092.jpg
Thanks for looking!!
I have been reading for a while, but haven't ever said much. I thought I would break the ice with some pictures of some planes I made. Sorry for the bad photos, but my basement is dark, and its cold outside!!
Most were made with instructions from the book Making Wood Tools by John Wilson. Its a good book, I recommend it.
The smoother and the little block plane blade were ordered from lee valley, they are the HSS blades for the wooden planes they sell.
The Razee style smoother:
Made from Bubbinga and Oak for the body, the wedge and the plugs are African Mahogany. The tapping plug is Tamboti.
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0080-1.jpg
Smoother with proof that it works:
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0075-2.jpg
A shoulder plane- actually the first plane I made:
Cherry and Oak, with Maple Plugs
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0081-1.jpg
A group photo of the Smoother, the shoulder plane, a little block plane, and a small router plane. They are in a photo with my Stanley #8 and craftsman 3732 block plane for scale. The block plane was my grandfathers, and it got me started with hand tools. It's still my favorite tool, just a pleasure to use. The little router plane was done almost entirely with hand tools, I used the drill press to drill the holes, the rest was all by hand..
http://i66.photobucket.com/albums/h250/tylermtech/DSCF0092.jpg
Thanks for looking!!