PDA

View Full Version : Creme Coolibah - finished (mostly)



Kathy Marshall
02-07-2013, 11:00 PM
Today I finished the bottom, did some touchups on sanding, wet sanded with DO and then applied another generous coat of DO and let it soak in for about 20 minutes before wiping off the excess. I will keep applying DO, letting it cure between coats, until I have the level of finish I'm looking for and then I'll buff it out.
It's about 14" at the widest and about 4" tall.
This wood was very hard and it was hard to get clean cuts, especially on the endgrain, so the shape isn't exactly what I envisioned, but I'm happy with how it turned out.
253727253728253729253730
Thanks for looking!
Comments and critiques are welcome.

robert baccus
02-07-2013, 11:06 PM
Very nice and unique shape and well finished as usual.

Eric Gourieux
02-08-2013, 1:17 AM
Very nice, Kathy. The wood is unique, and your choice of shape goes well with it.

George Barber
02-08-2013, 6:06 AM
That is one marvelous piece. The third pic highlights its natural and organic feel but communicates motion to me, too.

Michelle Rich
02-08-2013, 6:08 AM
looks like it is capable of mach1 :-) I think you finished it well.