Core drill for wood?

[Luke Pighetti]

Hey guys

I made a lot of small pegs that are about 1/4" wide and 1/2" long. Trying to figure out how cut them quickly. Was thinking some kind of core drill would be nice, but I'm open to suggestions.

[Jerry Miner]

How about a plug cutter? Such as:

plug cutter (http://www.leevalley.com/US/wood/page.aspx?p=32320&cat=1,180,42288)

Or a tenon cutter:

tenon cutter (http://www.leevalley.com/US/wood/page.aspx?p=42292&cat=1,180,42288)

[Joe Kieve]

Or a 1/4" dowel cut to length.

[Luke Pighetti]

They are made of various exotic hardwoods, so the plug cutter is going to be the trick. Thanks!