Mark Kristan
02-05-2013, 2:51 PM
Has anyone ever tried to manually expand the size of their table? I'm thinking I will pick up an Incra Super System, the problem is with the size of my table top. It is 32X24, with the T track running along the 32" length, so there is insufficient room behind the router for the jig. Incra's manual suggests screwing angle braces to the bottom of the table and a piece the same thickness and width to expand the size of the top. I can't see a reason why this wouldn't work, just wanted to get feedback from anyone who has tried something like this. I currently have a PC 7518 set up under the top and am trying to get away without buying a new table and lift, and going to the trouble of setting that all up again.