Timothy Mann
01-24-2013, 9:03 PM
I found a thread here on SMC that had a link with instructions on how to make one of these.
http://www.sawmillcreek.org/showthread.php?154337-The-Golden-Mean-Caliper
I have read alot about these recently, and as it was far to cold to spend to much time turning the past couple of days with negative temps around here I thought this would be a quick project to at least give me a little shop time today, this took about an hour. Made from mahogany scraps. I managed to get it up to 39 in the shop with the heater going so an hour was all I could take.
http://www.sawmillcreek.org/showthread.php?154337-The-Golden-Mean-Caliper
I have read alot about these recently, and as it was far to cold to spend to much time turning the past couple of days with negative temps around here I thought this would be a quick project to at least give me a little shop time today, this took about an hour. Made from mahogany scraps. I managed to get it up to 39 in the shop with the heater going so an hour was all I could take.