Roger Leclercq
01-19-2013, 2:06 PM
Here is my Custom Combo Table that I finished in December it has the following functions
<1> Stockroom supply 24” sander on left side.
<2> Craftsman 10” Contractors saw in Middle.
<3> Lighted Enclosed Router Table Porta Cable 7539 Router
<4> Custom dust collection with individual homemade blast gates. I also have parts for overhead dust collection for saw blade guard and router fence. Just haven’t installed it yet.
<5>Total storage 17 drawers 90% heavy roller slides scarfed from trash.
<6> Incra TS-32 Fence setup
<7>Charging Station for my cordless tools.
<8< Whole cabinet is on lockable rollers in order to be able to move it around when needed.
This took me 2 years from time of conception until completion I Finally got the time to work on it. The top was made from an old conference room table that was being thrown in the trash 1.5” thick Laminate both sides. Cabinet is ¾” Burch Plywood with Maple face frame using pocket hole joinery. I still have to install some T-Track and Stain the cabinet (Notice the protective coating in cabinet door panes).
<1> Stockroom supply 24” sander on left side.
<2> Craftsman 10” Contractors saw in Middle.
<3> Lighted Enclosed Router Table Porta Cable 7539 Router
<4> Custom dust collection with individual homemade blast gates. I also have parts for overhead dust collection for saw blade guard and router fence. Just haven’t installed it yet.
<5>Total storage 17 drawers 90% heavy roller slides scarfed from trash.
<6> Incra TS-32 Fence setup
<7>Charging Station for my cordless tools.
<8< Whole cabinet is on lockable rollers in order to be able to move it around when needed.
This took me 2 years from time of conception until completion I Finally got the time to work on it. The top was made from an old conference room table that was being thrown in the trash 1.5” thick Laminate both sides. Cabinet is ¾” Burch Plywood with Maple face frame using pocket hole joinery. I still have to install some T-Track and Stain the cabinet (Notice the protective coating in cabinet door panes).