Keith Outten
01-16-2013, 1:23 PM
SawMill Creek Tenth Anniversary Prize #8
251372
Low-Angle Jack Plane with the new PM-V11 Blade
http://www.leevalley.com
251373
Check out the video (javascript:OpenVideo('18','640','390');)
Jack Plane Web Page (http://www.leevalley.com/US/wood/Page.aspx?p=49708&cat=1,230,41182,48944)
Our low-angle jack plane is ideal for shooting miters, working end grain, and initial smoothing. We have designated it as a 62-1/2 because of its generous size and weight, low center of gravity, and radically set-back mouth. This is a bevel-up plane, with a 12° bed angle similar to a low-angle block plane.
The plane is 15" long, 2-3/4" wide and weighs in at 5 lb 12 oz. You will appreciate the way this plane (with a toe that is one third the length of the sole) registers to the workpiece. The body is fully stress-relieved, ductile cast iron. With sides machined square to the sole, a specially shaped lever cap, and the machined thumb recess on either side of the body, it provides both comfort and excellent control when shooting.
The plane's adjustable mouth can be closed to a narrow slit for fine shavings with minimum tear-out or opened for heavier cuts. All of this can be done quickly and accurately with the front locking knob and the unique mouth adjustment screw. The large bubinga front knob and rear handle provide a comfortable grip. The adjustment mechanism, with its combined feed and lateral adjustment knob, makes blade setting easy and accurate. The set screws on either side of the blade prevent it from shifting in use, but allow full lateral adjustment.
Includes a lapped 25° blade, 2-1/4" wide by 3/16" (0.187") thick, in PM-V11™ tool steel. Lapped 38° and 50° blades are available, as well as a toothed A2 blade for working difficult grain. Retail price $240.00
Honing instructions for various cutting angles included.
Contact Information
E-mail: customerservice@leevalley.com
Phone
To Place an Order Customer Service
From USA: 1-800-871-8158 1-800-267-8735
From Canada: 1-800-267-8767 1-800-267-8761
From other countries: 1-613-596-0350 1-613-596-0350
Our telephones are staffed Monday to Friday from 7 a.m. to 7 p.m. and from 9 a.m. to 5 p.m. on Saturday (Eastern Time). Answering machines are used outside these hours.
Fax
From USA: 1-800-513-7885
From Canada: 1-800-668-1807
From other countries: 1-613-596-6030
Our fax machines are on 24 hours a day, 7 days a week.
Letter Mail
From USA: From Canada and other countries:
Lee Valley Tools Ltd.
P.O. Box 1780
Ogdensburg, NY 13669-6780
Lee Valley Tools Ltd.
P.O. Box 6295, Station J
Ottawa, ON K2A 1T4
Special Thanks to Sue Clark, the Marketing Manager at Lee Valley & veritas, for this generous donation.
To Register To Win This Prize Please Post In This Thread (http://www.sawmillcreek.org/showthread.php?197360-FreeStuff-Drawing-Low-Angle-Jack-plane-with-PM-V11-blade&p=2039726#post2039726)
.
251372
Low-Angle Jack Plane with the new PM-V11 Blade
http://www.leevalley.com
251373
Check out the video (javascript:OpenVideo('18','640','390');)
Jack Plane Web Page (http://www.leevalley.com/US/wood/Page.aspx?p=49708&cat=1,230,41182,48944)
Our low-angle jack plane is ideal for shooting miters, working end grain, and initial smoothing. We have designated it as a 62-1/2 because of its generous size and weight, low center of gravity, and radically set-back mouth. This is a bevel-up plane, with a 12° bed angle similar to a low-angle block plane.
The plane is 15" long, 2-3/4" wide and weighs in at 5 lb 12 oz. You will appreciate the way this plane (with a toe that is one third the length of the sole) registers to the workpiece. The body is fully stress-relieved, ductile cast iron. With sides machined square to the sole, a specially shaped lever cap, and the machined thumb recess on either side of the body, it provides both comfort and excellent control when shooting.
The plane's adjustable mouth can be closed to a narrow slit for fine shavings with minimum tear-out or opened for heavier cuts. All of this can be done quickly and accurately with the front locking knob and the unique mouth adjustment screw. The large bubinga front knob and rear handle provide a comfortable grip. The adjustment mechanism, with its combined feed and lateral adjustment knob, makes blade setting easy and accurate. The set screws on either side of the blade prevent it from shifting in use, but allow full lateral adjustment.
Includes a lapped 25° blade, 2-1/4" wide by 3/16" (0.187") thick, in PM-V11™ tool steel. Lapped 38° and 50° blades are available, as well as a toothed A2 blade for working difficult grain. Retail price $240.00
Honing instructions for various cutting angles included.
Contact Information
E-mail: customerservice@leevalley.com
Phone
To Place an Order Customer Service
From USA: 1-800-871-8158 1-800-267-8735
From Canada: 1-800-267-8767 1-800-267-8761
From other countries: 1-613-596-0350 1-613-596-0350
Our telephones are staffed Monday to Friday from 7 a.m. to 7 p.m. and from 9 a.m. to 5 p.m. on Saturday (Eastern Time). Answering machines are used outside these hours.
Fax
From USA: 1-800-513-7885
From Canada: 1-800-668-1807
From other countries: 1-613-596-6030
Our fax machines are on 24 hours a day, 7 days a week.
Letter Mail
From USA: From Canada and other countries:
Lee Valley Tools Ltd.
P.O. Box 1780
Ogdensburg, NY 13669-6780
Lee Valley Tools Ltd.
P.O. Box 6295, Station J
Ottawa, ON K2A 1T4
Special Thanks to Sue Clark, the Marketing Manager at Lee Valley & veritas, for this generous donation.
To Register To Win This Prize Please Post In This Thread (http://www.sawmillcreek.org/showthread.php?197360-FreeStuff-Drawing-Low-Angle-Jack-plane-with-PM-V11-blade&p=2039726#post2039726)
.