View Full Version : FreeStuff Winner - Carbide Processor Saw Blades Harold-Burrell
Keith Outten
01-15-2013, 10:56 PM
SawMill Creek Tenth Anniversary Drawing #6
Winner Harold-Burrell (http://www.sawmillcreek.org/member.php?45234-Harold-Burrell)
Carbide Processors
Carbide Processors is offering 2 Custom Made Saw blades made to your specifications from their Line of the World’s Best Saw Blades.
With our Cermet II tipped World’s Best Saw Blades you will receive a Saw Blade that gives a better edge than standard Carbide Tipped Blades, stays sharper longer, and is more resistant to tip fracture.* Our World’s Best Saw Blades use an advanced technology Cermet II tips that are more heat resistant than carbide, allowing you to cut at faster feed rates without harming the saw blade or burning your wood.* When it does come time to sharpen, they can be ground just like standard carbide blades, so no special sharpening is needed.
These blades are reported to last anywhere between 3-10 times longer between sharpening than standard carbide tipped saw blades and give a smooth, glue-ready cut.
You choose the type and all the specs and Carbide Processors will make you your new favorite Saw Blade.
Visit this Web Page for more information and to view a comprehensive video. (http://www.carbideprocessors.com/pages/saw-blades/longlife-saw-blades.html)
Phone: 800-346-8274
Fax: 253-476-1321
3847 S. Union Ave.
Tacoma, WA 98409
www.CarbideProcessors.com
Special thanks to Tom Waltz and E. Renee Whitney for their hard work and effort making this prize available.
To Register To Win This Prize Please Post In This Thread
Members must upgrade their account status to Contributor before you can register to win this prize.
phil harold
01-15-2013, 11:29 PM
Count me in
Thanks!
Brett Robson
01-15-2013, 11:44 PM
Me too! Thanks!
Bonnie Campbell
01-15-2013, 11:54 PM
Count me in, thanks!
thomas prusak
01-16-2013, 12:03 AM
Please count me in!
John Coloccia
01-16-2013, 12:07 AM
Now, here is something I can actually use....and Tom and I have even briefly chit chatted about a custom blade at one point....LOL...count me in. I'm gunning for you, Tom :)
Brian Kent
01-16-2013, 12:31 AM
Posting and entering!
Jim Tobias
01-16-2013, 12:33 AM
Count me in!!!
I need a couple of new blades.
Jim
Guy Belleman
01-16-2013, 12:43 AM
Please include in this opportunity. Thank-you.
Jim Barrett
01-16-2013, 1:02 AM
Count me in!
Patrick McCarthy
01-16-2013, 1:25 AM
Wow; great stuff. Please include me in the drawing. Thank you to Tom Waltz, Renee Whitney and Keith Outten. Patrick
Glenn Kramer
01-16-2013, 1:30 AM
Please put my name on the. Great blades!
Glenn Vaughn
01-16-2013, 1:37 AM
Please include me.
Kevin Nathanson
01-16-2013, 1:42 AM
Absolutely. Mr. Felder can always use a new blade!
K
Bill Clark De
01-16-2013, 5:48 AM
thank you for the offer
Andrew Kertesz
01-16-2013, 6:20 AM
Please add my name to this list.
Dan Hintz
01-16-2013, 6:53 AM
Always good to have another on hand... I'm in.
Bob Johnson Lake Geneva
01-16-2013, 6:54 AM
Interesting blade, if I can get a blade with tolerances of under 0.001 I'm in.
Greg Just
01-16-2013, 7:10 AM
Please include me! Thanks
Bruce Dillingham
01-16-2013, 7:14 AM
Please include me. Thanks
Phil Rose
01-16-2013, 7:22 AM
Please add me to the list.
Matt Meiser
01-16-2013, 7:23 AM
In. Thanks Carbide Processors.
Justin J. Hoffmann
01-16-2013, 8:11 AM
Wow, more great stuff. Please count me in.
Thanks,
Justin
Shawn Bush
01-16-2013, 8:18 AM
Add me to the list please
Thanks
John R. Hilts
01-16-2013, 8:27 AM
Please count me in.
Mark Stubblefield
01-16-2013, 8:49 AM
Wow that'd be sweet to win!
Kevin Kronewitter
01-16-2013, 9:00 AM
Please add me to the drawing.
Kevin
Matt Schroeder
01-16-2013, 9:08 AM
Please include me in this great drawing!
Larry Browning
01-16-2013, 9:12 AM
I need a couple of new blades. Sign me up!
Bob Vavricka
01-16-2013, 9:35 AM
Count me in.
Von Bickley
01-16-2013, 9:40 AM
Please add my name to the list.....
Kerry Adams
01-16-2013, 9:45 AM
Count me in please!
Thanks,
Kerry
Steve Mueller
01-16-2013, 10:01 AM
Count me in
Harry Hagan
01-16-2013, 10:04 AM
Many thanks to Tom and Renee. Count me in.
Jeff Belany
01-16-2013, 10:44 AM
Add me to the list
Don Newman
01-16-2013, 10:52 AM
This would be great! Count me in, please.
Dave Bonde
01-16-2013, 11:10 AM
Please count me in. Thanks
Jon Nuckles
01-16-2013, 11:18 AM
I'd like that! Thanks.
Ted Calver
01-16-2013, 11:31 AM
Please count me in too.
Jim German
01-16-2013, 11:44 AM
Yay, Free stuff!
Stan Mitchell
01-16-2013, 12:15 PM
More free stuff please.
Danny Thompson
01-16-2013, 12:31 PM
Nice-looking blades. Please count me in.
Ryan Mooney
01-16-2013, 12:37 PM
I'm in, thanks guys!
John Altberg
01-16-2013, 12:39 PM
Count me in, please.
James Conrad
01-16-2013, 12:59 PM
Count me in! Many thanks to SMC!
Mike Henderson
01-16-2013, 1:01 PM
Please add me to the list.
Mike
Thom Sturgill
01-16-2013, 1:14 PM
count me in!
Ken Kimbrell
01-16-2013, 1:55 PM
Add me to the list please.
kevin nee
01-16-2013, 2:03 PM
count me in
Dale Coons
01-16-2013, 2:03 PM
Yes, count me in!
Jim Neeley
01-16-2013, 2:07 PM
Please count me in!
Jim Colombo
01-16-2013, 2:14 PM
Count me in.
Thanks
Jim
Donald Henshaw
01-16-2013, 2:16 PM
Please count me in, thanks to all for the hard work to have these.
Don
Matt Day
01-16-2013, 2:17 PM
Sign me up!
Dave Wyatt
01-16-2013, 2:30 PM
Have heard of them and would love to get one. Count me in
Greg Ketell
01-16-2013, 2:43 PM
Yes please!
David Helm
01-16-2013, 3:00 PM
Please enter me
Jim Underwood
01-16-2013, 3:08 PM
Please count me in. Thank you.
Sparky Paessler
01-16-2013, 3:28 PM
Thanks! Count me in also.
Chuck Darney
01-16-2013, 3:32 PM
I'm in. I could always use additional saw blades!
Mike Wilkins
01-16-2013, 3:37 PM
Please put my name in the hat. Thanks.
John Meyer
01-16-2013, 4:00 PM
Thanks for the offer. Count me in.
John
David Reed
01-16-2013, 4:20 PM
Count me in please!
Mike Hollis
01-16-2013, 4:32 PM
Count me in please.
Jim O'Dell
01-16-2013, 5:34 PM
My request is for a 24 tooth full kerf ripper blade, and a flat bottom box joint blade. That will round out my arsenal of blades, save a dado. Thanks! Jim.
Mike Cruz
01-16-2013, 5:36 PM
DROOOOOOOOOOOOOOOOOOOOOOOOOOLLLLLLLLLLLLL......... .... PLEASE sing me up!
Rick Moyer
01-16-2013, 5:37 PM
Count me in. Thanks again.
Timothy Mann
01-16-2013, 6:39 PM
Thank you and please count me in.
John M Bailey
01-16-2013, 6:43 PM
Thanks for the offer. Count me in
Jerry White
01-16-2013, 7:30 PM
Thank you Carbide Processors. I hope I can be drawn for this one!
Craig Coney
01-16-2013, 7:32 PM
Please count me in. Thanks
Ryan Baker
01-16-2013, 7:37 PM
Please add me to the list. Thanks.
Aaron Menning
01-16-2013, 7:39 PM
Please, enter me in the contest.
Lori Kleinberg
01-16-2013, 7:49 PM
Nice, count me in.
Stephen Smith Sr
01-16-2013, 9:15 PM
Oh yes, I'm in!
glenn bradley
01-16-2013, 9:33 PM
Oh boy, oh boy, oh boy, oh boy, oh boy, oh boy, I'm in.
Joe Bradshaw
01-16-2013, 9:46 PM
I want in.
M Toupin
01-16-2013, 9:52 PM
Add me please!
Mike
Troy Turner
01-16-2013, 10:02 PM
Count me in...
James Roberts
01-16-2013, 10:04 PM
Please count me in.
James Combs
01-16-2013, 10:42 PM
Count me in.
Alan Trout
01-16-2013, 10:48 PM
Please count me in.
Thanks
Alan
Cary Falk
01-16-2013, 10:56 PM
Please add me to the list. Thank you.
Peter Hanson
01-16-2013, 10:56 PM
Please include me in the drawing
Joe Adams
01-16-2013, 11:13 PM
Please count me in. Thanks!
Anthony Diodati
01-16-2013, 11:34 PM
include me 2 Thanks
Rob Wachala Jr
01-16-2013, 11:38 PM
Count Me in.
Cindy Marasco
01-16-2013, 11:56 PM
Count me in.
David Kuzdrall
01-17-2013, 12:03 AM
Please count me in.
thx
Dave Clermont
01-17-2013, 12:24 AM
Count me in :)
Michael Gaynes
01-17-2013, 12:41 AM
Thank You! Count me in...
Bob Merhar
01-17-2013, 1:21 AM
Please count me in.
Ed Murray
01-17-2013, 2:01 AM
Please count me in, thanks
Joe Mioux
01-17-2013, 4:09 AM
Im in thanks
Matt Zettl
01-17-2013, 4:21 AM
Count me in. Thanks.
Kurt Cady
01-17-2013, 6:26 AM
Count me in please
Jim Stewart
01-17-2013, 6:56 AM
Please count me in. Thanks to the provider.
Rudy Ress
01-17-2013, 8:18 AM
Please count me in. Thanks.
Carl Beckett
01-17-2013, 9:15 AM
Please count me in!
james glenn
01-17-2013, 9:34 AM
ME too Please!!!
Robert Alexander
01-17-2013, 10:02 AM
Add me to the list!
Sam Murdoch
01-17-2013, 10:11 AM
Sounds like a sharp deal! I'm in please.
Bernie Weishapl
01-17-2013, 10:58 AM
Count me in and thanks for the offer.
Alan Greene
01-17-2013, 11:33 AM
Count me in please.
Gordon Eyre
01-17-2013, 11:36 AM
Please include me in the drawing.
Don Orr
01-17-2013, 1:15 PM
Please enter me in this drawing. Thanks.
Joe Angrisani
01-17-2013, 1:20 PM
Count me in on this one, please!
Eric R. Smith
01-17-2013, 2:06 PM
I'm in thanks
eugene thomas
01-17-2013, 2:19 PM
count me in to
thanks Eugene
Harry Hall
01-17-2013, 2:52 PM
wow great prize register me thank you
Prashun Patel
01-17-2013, 2:59 PM
Please include me. Would LOVE to have 7 degree grind on the teeth for dovetails!
Sid Matheny
01-17-2013, 3:20 PM
Please count me in also.
Sid
Dick Phillip
01-17-2013, 3:53 PM
Please include me.
Dick
ben searight
01-17-2013, 4:03 PM
Please count me in!
Dave Beauchesne
01-17-2013, 4:30 PM
Please include me on this one as well - thanks!
Mark Ashmeade
01-17-2013, 4:59 PM
Thanks Carbide Processors! Please count me in.
Dell Littlefield
01-17-2013, 5:01 PM
I want a chance too!
Glen Monaghan
01-17-2013, 5:05 PM
Count me in, please!
Tom Hartranft
01-17-2013, 5:38 PM
I'm in for the saw blades.
Larry Olsen
01-17-2013, 5:42 PM
Could always use some new blades. Many thanks to Carbide Processors for this prize. I'm in!
Larry
richard poitras
01-17-2013, 8:40 PM
Count me in
Thanks!
Richard
Ronald Blue
01-17-2013, 8:45 PM
Add me please
Phil Thien
01-17-2013, 9:10 PM
Once again, count me in please.
Roger Myers
01-17-2013, 9:17 PM
Please count me in!
Neil Longhenry
01-17-2013, 9:29 PM
Please Count me in. Thank you!
Mike Zilis
01-17-2013, 9:45 PM
Please include me. Thanks!
Jim Cook
01-17-2013, 9:57 PM
Please add me in. Thanks
Michael Weber
01-17-2013, 10:06 PM
Enter me as well. Thanks
Mike McCann
01-17-2013, 10:06 PM
please add me
Shawn Christ
01-17-2013, 10:29 PM
I'm sold, looks like a great product!
Steve Campbell
01-17-2013, 10:33 PM
count me in also. Thanks
Steve
Nick Jarrell
01-17-2013, 11:13 PM
Sounds like a great prize. Count me in please.
Rich Riddle
01-17-2013, 11:33 PM
Me as well. Thank you.
Christopher Morgan
01-17-2013, 11:46 PM
Count me in, too.
Thanks, Christopher
Tom Blank
01-18-2013, 12:38 AM
Please add me to the list.
Thanks.
Thomas Hotchkin
01-18-2013, 12:54 AM
Count me in, thanks. Tom
Larry Whitlow
01-18-2013, 1:16 AM
Wow - this is fantastic. Thanks.
William C Rogers
01-18-2013, 3:17 AM
I definitely need new blades. Count me in.
Shawn Russell
01-18-2013, 3:54 AM
Throwing my hat in the ring.
Also signed up on their mailing list. I hope others do the same.
Chris Fairbanks
01-18-2013, 4:59 AM
Count me in. Thanks
keith jensen
01-18-2013, 6:54 AM
Please count me in. Thanks.
Scott Hackler
01-18-2013, 9:22 AM
Add me please
Doug Kerfoot
01-18-2013, 9:39 AM
Yes please!
Peter Rawlings
01-18-2013, 10:21 AM
What's not to like, I'm in.
Adam Gerlach
01-18-2013, 11:36 AM
Custom saw blades? Count me in!
Harlan Kilbourn
01-18-2013, 12:20 PM
Wow, Count Me in. Thanks
Mike Wagner
01-18-2013, 1:55 PM
Please enter me in the drawing.
Mike Wagner
Paul Mattaliano
01-18-2013, 2:27 PM
please add me. Thanks!
Marty Gulseth
01-18-2013, 3:13 PM
I am in, please.
Johannes Becker
01-18-2013, 3:29 PM
Count me in.
Brent Ring
01-18-2013, 4:15 PM
Count me In. Thank You!
Greg Wease
01-18-2013, 5:10 PM
Sounds interesting!
Scott Haddix
01-18-2013, 6:30 PM
Please count me in, and thanks Tom and Renee.
Lorne Steed
01-18-2013, 6:44 PM
Cool.....this would be great to win.... count me in please. Thanks
Steve Holmquest
01-18-2013, 7:27 PM
Add me, could use a good blade
Lee Schierer
01-18-2013, 7:56 PM
I could use a special blade, sign me up.
Scott Besaw
01-18-2013, 8:51 PM
count me in,thanks
Mike Tekin
01-18-2013, 8:55 PM
Some new blades would be great which also is coming from a great company - count me in
Josh Rudolph
01-18-2013, 9:09 PM
Count me in please.
Larry Frank
01-18-2013, 9:41 PM
Please count me in
Michael Dromey
01-18-2013, 10:08 PM
Count me in please
Bob Lloyd
01-18-2013, 11:24 PM
Count me in. Thanks.
daniel lane
01-18-2013, 11:34 PM
What a great donation! Thanks to Tom and Renee, and please count me in!
daniel
Al Stramiello
01-18-2013, 11:37 PM
Thanks . . . I'm in.
Mike Cozad
01-19-2013, 4:32 AM
Please count me in.
Jerome Stanek
01-19-2013, 7:42 AM
add me also
Dave Verstraete
01-19-2013, 8:53 AM
Please count me in also
Steven Wahlert
01-19-2013, 9:35 AM
Count me in
Thanks!
Dave Bunge
01-19-2013, 9:52 AM
Please count me in.
Rich Aldrich
01-19-2013, 10:08 AM
Please count me in. Thank you.
Robert Nease
01-19-2013, 3:19 PM
Count me in, please
Mike Wagner
01-19-2013, 3:56 PM
Please enter me in the drawing.
Mark Godlesky
01-19-2013, 4:17 PM
Include me too. Thanks to Tom for donating and sharing his knowledge as well!
David Rust
01-19-2013, 4:56 PM
Please count me in!
Andrew Pitonyak
01-19-2013, 8:59 PM
Please add me
Kevin Groenke
01-19-2013, 9:10 PM
I've been thinking of giving these a try.
David Peterson MN
01-19-2013, 9:47 PM
I need a new blase, please count me in!
Steven Triggs
01-20-2013, 4:24 AM
Please count me in. Thanks!
John Blainer
01-20-2013, 8:39 AM
I'm in ... thanks!
Jimmy Phillips
01-20-2013, 10:07 AM
Count me in please!
Maurice Ungaro
01-20-2013, 10:09 AM
Put my name on the list!
Bill Bolen
01-20-2013, 10:19 AM
count me in also.
Andrew Joiner
01-20-2013, 10:51 AM
I'm in ... thank you.
Scott Donley
01-20-2013, 11:07 AM
Please count me in!
cal thelen
01-20-2013, 11:46 AM
those sound great add me to list please thanks
Jon Lanier
01-20-2013, 1:37 PM
Another Sweet offer!
Rick Cuilty
01-20-2013, 1:54 PM
I would find a custom blade very handy.
David Warkentin
01-20-2013, 2:08 PM
Count me in, please.
Ernie DeMartino
01-20-2013, 4:17 PM
Please count me in
Thank you
Joe Meirhaeghe
01-20-2013, 5:20 PM
Count me in, this sounds like a cool prize.
Jim Belair
01-20-2013, 6:02 PM
OK, count me in too please.
Raymond Fries
01-20-2013, 6:49 PM
Count me in. Thanks
Ed Aumiller
01-20-2013, 8:15 PM
Count me in....
Thanks
Christopher Dopp
01-20-2013, 10:32 PM
Please add me to the list.
David Frech
01-20-2013, 10:54 PM
please add me to the list.
Dimitrios Fradelakis
01-20-2013, 11:20 PM
count me in please.
Scott T Smith
01-20-2013, 11:49 PM
Keith, please count me in. Thx.
Mack Lund
01-21-2013, 12:44 AM
Count me in. Thanks.
Dennis Yamamoto
01-21-2013, 1:24 AM
Count me in too. Thanks!
Bill ThompsonNM
01-21-2013, 7:40 AM
Sounds Great! Sign me up!
Dave Mcintire
01-21-2013, 8:53 AM
I,m in
dave mc
Stew Hagerty
01-21-2013, 8:58 AM
Well, now this would be cool.
Tony Sade
01-21-2013, 10:33 AM
In. Thanks.
steve mcconnell
01-21-2013, 1:48 PM
Count me in too, please.
Thanks!
steve
Igor Petrenko
01-21-2013, 4:12 PM
Count me in. Thanks
Ralph Okonieski
01-21-2013, 6:28 PM
Please count me in. Thanks.
Thanks to Carbide Processors for a great and unique prize.
Tom Willoughby
01-21-2013, 6:52 PM
These sound like very good saw blades. Please include me in the draw.
Thanks.
Tom
Michael Doyle
01-21-2013, 7:25 PM
I'm In
Thanks
Dave Halter
01-21-2013, 11:16 PM
Please count me in.
Jeff Childs
01-22-2013, 12:16 AM
Always need a fresh blade. Thanks!
James Taglienti
01-22-2013, 1:00 AM
Sign me up! Thanks
Brent VanFossen
01-22-2013, 1:15 AM
Yes, please!
George Bokros
01-22-2013, 8:08 AM
I am in.
Thanks
Gary Gardner
01-22-2013, 9:53 AM
sign me up please
Gary Muto
01-22-2013, 11:07 AM
Very cool! Please include me.
Ben Martin
01-22-2013, 6:05 PM
In! And thanks to the donators!
Kevin Guarnotta
01-22-2013, 7:51 PM
That would be phenomenal, I didn't even know it was possible to get custom saw blades made.
Robert Willing
01-22-2013, 8:49 PM
Please count me in I could use a good BS blade.
Jay Runde
01-23-2013, 12:11 AM
count me in, Thanks!
Stephen Maloney
01-23-2013, 12:35 AM
Count me in please!
Don McManus
01-23-2013, 1:06 AM
Please count me in ...thx!
Cliff Bisson
01-23-2013, 6:13 AM
In please!
Floyd Cox
01-23-2013, 10:56 AM
count me in please..
Tom Giles
01-23-2013, 11:43 AM
Count me in!
Gary Kvasnicka
01-23-2013, 12:19 PM
Count me in. Thanks!
Tom Ruflin
01-23-2013, 12:27 PM
Count me in.
Thanks.
Eric Seest
01-23-2013, 12:38 PM
Count me in, please.
Christian Castillo
01-23-2013, 2:51 PM
Count me in!
Glenn Samuels
01-23-2013, 3:36 PM
Please count me in!
Ron Kanter
01-23-2013, 4:34 PM
I'm in,
Ron
Gilbert Vega
01-23-2013, 5:31 PM
Count me in please.
Jim Kilburg
01-23-2013, 11:35 PM
Great prize, count me in.
Bill Edwards(2)
01-24-2013, 9:56 AM
Please register me.
Mark Leu
01-24-2013, 9:57 AM
Thank you Carbide Processors!
dan carter
01-24-2013, 10:43 AM
Count me in.
Chuck Saunders
01-24-2013, 1:14 PM
Sounds cool, thanks Tom
Dustin Leonard
01-24-2013, 8:02 PM
sign me up please
Bill Bukovec
01-24-2013, 8:52 PM
I'm in.
Bill .
Michael Heffernan
01-24-2013, 10:17 PM
Thanks for the offer. I'm in.
Tony Greenway
01-24-2013, 10:34 PM
I can always use a new blade
Don Nicholas
01-24-2013, 11:10 PM
Please count me in
thank You
Dan Masshardt
01-24-2013, 11:41 PM
Wow. Fantastic.
Rich Engelhardt
01-25-2013, 8:31 AM
I'm in - Tom is good people & Carbide Processors rocks!
Jeff Bartley
01-25-2013, 8:37 AM
Count me in, and Thanks!
Brian Kincaid
01-25-2013, 11:55 AM
Please count me in!
-Brian
Jim Tabor
01-25-2013, 1:32 PM
Please add my name and use one day shipping with UPS. I need it ASAP. Thanks
John Daugherty
01-25-2013, 4:18 PM
count me in!
Pete Jordan
01-25-2013, 5:27 PM
Count me in!
Steven Lee, NC
01-25-2013, 6:46 PM
Happy anniversary
Mike Tilley
01-26-2013, 7:56 AM
count me in thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.