Jerry Bruette
01-15-2013, 10:26 AM
I picked up about 200 square feet of 6 inch red oak flooring that I'd like to put on the wall instead of the floor.
What I'd like to do is ease the corners of the tongue and groove sides of the planks, not by much but just enough to show the lines between the planks after it's mounted.
What would be the best way to do this? Router in table or something like a Lee Valley Cornering Tool.
Jerry
What I'd like to do is ease the corners of the tongue and groove sides of the planks, not by much but just enough to show the lines between the planks after it's mounted.
What would be the best way to do this? Router in table or something like a Lee Valley Cornering Tool.
Jerry