Elijah Fontenot
01-13-2013, 1:15 AM
I just got my G0454Z and I was wondering if I'm supposed to leave the sponge/foam material under the chip breaker and under the hood?
Did you leave it or pull it? My question is asked b/c my HF DC hooked directly to it (Necked down from 5" to 4" off the planer) doesn't do that good of chip collection. I get a decent amount of chips that come back out of the front of the planer. I thought it might be b/c of the foam, or the need for more CFM. But before I remove it, I thought I'd ask.
Did you leave it or pull it? My question is asked b/c my HF DC hooked directly to it (Necked down from 5" to 4" off the planer) doesn't do that good of chip collection. I get a decent amount of chips that come back out of the front of the planer. I thought it might be b/c of the foam, or the need for more CFM. But before I remove it, I thought I'd ask.