Ralph Okonieski
01-05-2013, 9:08 AM
I'm considering purchase of a Minimax C26 or Hammer C31 combo machines. A search here and the web including the Yahoo discussion group has turned up little. Any owners care to share their experiences? Both Minimax and Hammer have very good reputations here.
I'm also considering separate machines but not sure there is enough room for a jointer/planer and TS with some working space.
The Minimax is the front runner primarily because the Hammer combo may not fit through the doorway. I really do not want to rip out the doorway and rebuild. Any machine is going to be a challenge to get to the basement.
All configurations are still on the table so any other ideas would be welcome.
Thanks in advance for your comments.
I'm also considering separate machines but not sure there is enough room for a jointer/planer and TS with some working space.
The Minimax is the front runner primarily because the Hammer combo may not fit through the doorway. I really do not want to rip out the doorway and rebuild. Any machine is going to be a challenge to get to the basement.
All configurations are still on the table so any other ideas would be welcome.
Thanks in advance for your comments.