Nicholas Lingg
12-21-2012, 8:35 AM
If anyone is having trouble with there older Jessem Rout-R-Lift FX adjustment not staying put, this is how I fixed the one I have
1st I replaced the adjustment screw with one about 3" longer and added a 3/4" dia. piece of rod on the bottom end.
248531
Then I made a clamp fastened it to sides of cabinet but it could be fixed to the legs if yours is on a table
248532
Then with a knob as in the picture it's just a matter reaching under the table and tightening it after you make your adjustment
248533
1st I replaced the adjustment screw with one about 3" longer and added a 3/4" dia. piece of rod on the bottom end.
248531
Then I made a clamp fastened it to sides of cabinet but it could be fixed to the legs if yours is on a table
248532
Then with a knob as in the picture it's just a matter reaching under the table and tightening it after you make your adjustment
248533