View Full Version : Can't find Brass ferrules or feet
ADRIAN ADAMS
12-13-2012, 11:07 AM
Can any kind person help me find brass ferrules or feet for a square 2" legg stool I have made. I have been through the normall internet search but can't find the size. I can reduce the size by a bit to make a fit.
Ken Fitzgerald
12-13-2012, 11:22 AM
Hi Adrian! Welcome to the Creek!
I took the liberty of moving this thread to the General Wood Working Forum as it more suited here.
Jay Jolliffe
12-13-2012, 11:30 AM
How about 2" square brass tubing....You may have to remove a little wood to fit the ID but that would make a shoulder. If you left the wood a tad longer than the tubing that could be what hits the floor. So you don't mark it up....http://www.markstaar.com/product/2-inch-square-polished-brass-tubing.html
Rodney Hoyle
12-13-2012, 1:08 PM
Try vandykes restoration(woonsocket, S.D.)and see if they can help.
Rodney
Tony Joyce
12-13-2012, 2:15 PM
http://www.leevalley.com/en/hardware/page.aspx?p=43918&cat=3,40993,41284&ap=1
(http://www.leevalley.com/en/hardware/page.aspx?p=43918&cat=3,40993,41284&ap=1http://pampco.net/square_ferrules.html)http://www.paxtonhardware.com/Furniture-Leg-Caps/departments/884/
http://www.whitechapel-ltd.com/category/stoecaps.html
http://pampco.net/square_ferrules.html
Can any kind person help me find brass ferrules or feet for a square 2" legg stool I have made. I have been through the normall internet search but can't find the size. I can reduce the size by a bit to make a fit.
Myk Rian
12-13-2012, 2:49 PM
Really do it up right and make some out of brass sheet stock.
ADRIAN ADAMS
12-15-2012, 5:06 AM
Thanks for taking the trouble to list these, will give them a try.
ADRIAN ADAMS
12-15-2012, 5:10 AM
Yes I have asked the son-law if he would make them should get them, should get them in about two years time.:o
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.