Can't find Brass ferrules or feet

[ADRIAN ADAMS]

Can any kind person help me find brass ferrules or feet for a square 2" legg stool I have made. I have been through the normall internet search but can't find the size. I can reduce the size by a bit to make a fit.

[Ken Fitzgerald]

Hi Adrian! Welcome to the Creek!

I took the liberty of moving this thread to the General Wood Working Forum as it more suited here.

[Jay Jolliffe]

How about 2" square brass tubing....You may have to remove a little wood to fit the ID but that would make a shoulder. If you left the wood a tad longer than the tubing that could be what hits the floor. So you don't mark it up....http://www.markstaar.com/product/2-inch-square-polished-brass-tubing.html

[Rodney Hoyle]

Try vandykes restoration(woonsocket, S.D.)and see if they can help.

Rodney

[Tony Joyce]

http://www.leevalley.com/en/hardware/page.aspx?p=43918&cat=3,40993,41284&ap=1

(http://www.leevalley.com/en/hardware/page.aspx?p=43918&cat=3,40993,41284&ap=1http://pampco.net/square_ferrules.html)http://www.paxtonhardware.com/Furniture-Leg-Caps/departments/884/

http://www.whitechapel-ltd.com/category/stoecaps.html

http://pampco.net/square_ferrules.html


Can any kind person help me find brass ferrules or feet for a square 2" legg stool I have made. I have been through the normall internet search but can't find the size. I can reduce the size by a bit to make a fit.

[Myk Rian]

Really do it up right and make some out of brass sheet stock.

[ADRIAN ADAMS]

Thanks for taking the trouble to list these, will give them a try.

[ADRIAN ADAMS]

Yes I have asked the son-law if he would make them should get them, should get them in about two years time.:o