Tom Winship
12-06-2012, 9:47 PM
I have been off of segmented turning for a couple of months doing other things (like a bathroom remodel, etc.) Did do some angels after being inspired by Curt Fuller, but just couldn't get the juices flowing for making and stacking rings.
So I did the following vase, wanting to concentrate on joints and ring to ring joints to get back in practice. I really like this form which I did on Woodturner's Studio (Jerry is in our club), and hope that I did it justice.
247261247260
Vase is about 5" in diameter and a little over 8" high. Wood is cherry with 9 coats of Woodturners Finish.
Comments and criticisms welcomed.
So I did the following vase, wanting to concentrate on joints and ring to ring joints to get back in practice. I really like this form which I did on Woodturner's Studio (Jerry is in our club), and hope that I did it justice.
247261247260
Vase is about 5" in diameter and a little over 8" high. Wood is cherry with 9 coats of Woodturners Finish.
Comments and criticisms welcomed.