2 Ply Chipboard

[Liesl Dexheimer]

Can 2 ply chipboard be cut on a 35 watt laser? I've seen that it is either .4" thick or 0.08" thick. If it's .4" thick I'm wondering if it can be done...might have to make several passes?...

[walter hofmann]

Hi liesl
I dont thyink that you can cut this wi9th your 35W even with more passes it would be verry chaired and eventually starts flames.
you probably are limited to max 1/4 in ch ply.
greetings
walt

[Liesl Dexheimer]

Actually I found out that the 2 ply is about 1/16" thick so luckily I can at least cut that thickness. Thank you for the response though.