View Full Version : 2 Ply Chipboard
Liesl Dexheimer
11-17-2012, 1:49 PM
Can 2 ply chipboard be cut on a 35 watt laser? I've seen that it is either .4" thick or 0.08" thick. If it's .4" thick I'm wondering if it can be done...might have to make several passes?...
walter hofmann
11-17-2012, 4:44 PM
Hi liesl
I dont thyink that you can cut this wi9th your 35W even with more passes it would be verry chaired and eventually starts flames.
you probably are limited to max 1/4 in ch ply.
greetings
walt
Liesl Dexheimer
11-23-2012, 9:40 AM
Actually I found out that the 2 ply is about 1/16" thick so luckily I can at least cut that thickness. Thank you for the response though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.