Does this router bit exist?

[scott vroom]

I want to put a double 45 degree bevel as in the pic....does anyone know if there's a router bit that will do this in a single pass?

[Mel Fulks]

I've never seen one,but there are some places that make custom router bits. Made that cut before with a corg head,you use a pair of " one up and one down" triangular knives to get a good sharp point.

[Dale Friend]

Several companies make a set of two cutters for plywood edgebanding that will meet your needs. Unfortunatly you have to buy the set of two and there not inexpensive.

Heres one from Eagle.

http://www.eagleamerica.com/product/v190-2012/ea_-_specialty_bits

[scott vroom]

Dale, that'll do the trick...thanks! And I don't mind buying the set because I've got some ply edgebanding projects coming up.

[Ken Fitzgerald]

Scott,

Here's a similar set from MLCS. http://www.mlcswoodworking.com/shopsite_sc/store/html/smarthtml/pages/bit_edgeband_ogee.html#edge_banding_anchor

I've used their Katana bits and have been quite pleased with the bits and service.

[scott vroom]

Thanks, Ken. Less expensive than the Eagle....I've also been happy with Katana bits.

[Peter Quinn]

Here is one from Infinity that is on sale presently.


http://www.infinitytools.com/Edge-Banding-Sets/products/1300/

[Dan Rude]

Just picked up a set of Whitesides for edge banding like the others have shown on clearance from my somewhat local Woodcraft last weak. Paid about $65 for the 1/2" shank version.
Dan

[John Coloccia]

Whiteside will make you anything you want, and the cost is typically pretty reasonable. They'll make you pretty much whatever you want.