Walt Langhans
11-16-2012, 3:19 PM
Has anyone worked with 1mm grayboard? I need some material that's 1mm thick that will take lasering well (cutting and engraving) so I can add a thickness detail to the mdf buildings that I'll be making. For example: 245674
If I where to cut out the same windows that are on this building and then glue them on top of it so they would stand out some. I'm thinking some paper or wood product so it takes paint well and can be easily glued on to the building.
Thanks!
If I where to cut out the same windows that are on this building and then glue them on top of it so they would stand out some. I'm thinking some paper or wood product so it takes paint well and can be easily glued on to the building.
Thanks!