Rob Price
11-08-2012, 11:05 AM
This will probably end up being a gift for someone this Christmas. The olive is a chunk I bought online from Jerusalem. I know there's lots of debate about "Bethlehem" olive, so I'll acknowledge the debate and I really don't want to hash it out here. The box shipped from Jerusalem, good enough for me. It wasn't expensive. Using the basic crushgrind shaftless mechanism. I recently had a shaft on a salt grinder break on me after only 6 months of use, so I decided I'd go with the more sturdy looking shaftless design (and about half the cost!).
Similar design to my first mills I posted a few months ago. I still haven't nailed the curve, but it's much better this go around. there was a fair bit of sapwood in this piece, so the 'back' of the mill is pretty plain but the other sides look great. I hate the maple plug on top. haven't figured out what I want to do up there, it works for now, I will probably bring the edge down and give it a sharper look, more dome like, to fit the piece better. That's easy enough to re-do.
Finish: 4 coats of shellac sealer followed by 5 coats of General WTF, buffed with Behlen's buffing polish. (I was worried about the water based poly sticking to the oily wood).
Comments appreciated. Thanks for looking.
https://lh5.googleusercontent.com/-TLGnVifOZ38/UJvQlgoL_tI/AAAAAAAAB0U/wAakSw3krnU/s800/IMG_3268.JPG
https://lh3.googleusercontent.com/-4AwfAaOdH1w/UJvQmMh_gEI/AAAAAAAAB0c/o6n3WXxePaQ/s800/IMG_3271.JPG
https://lh6.googleusercontent.com/-kNn7hRUb9-Y/UJvQmwLfEMI/AAAAAAAAB0k/-OJJ0f1i8Dc/s800/IMG_3280.JPG
Similar design to my first mills I posted a few months ago. I still haven't nailed the curve, but it's much better this go around. there was a fair bit of sapwood in this piece, so the 'back' of the mill is pretty plain but the other sides look great. I hate the maple plug on top. haven't figured out what I want to do up there, it works for now, I will probably bring the edge down and give it a sharper look, more dome like, to fit the piece better. That's easy enough to re-do.
Finish: 4 coats of shellac sealer followed by 5 coats of General WTF, buffed with Behlen's buffing polish. (I was worried about the water based poly sticking to the oily wood).
Comments appreciated. Thanks for looking.
https://lh5.googleusercontent.com/-TLGnVifOZ38/UJvQlgoL_tI/AAAAAAAAB0U/wAakSw3krnU/s800/IMG_3268.JPG
https://lh3.googleusercontent.com/-4AwfAaOdH1w/UJvQmMh_gEI/AAAAAAAAB0c/o6n3WXxePaQ/s800/IMG_3271.JPG
https://lh6.googleusercontent.com/-kNn7hRUb9-Y/UJvQmwLfEMI/AAAAAAAAB0k/-OJJ0f1i8Dc/s800/IMG_3280.JPG