View Full Version : Clock Face Dial Center Hole
Richard Temple
10-31-2012, 1:30 PM
Hi All: I am making a wall clock with a thick card stock paper dial. How would one go about making a nice clean center hole cut for the mechanisms? Hand paper hole punches will not reach center, too small.
Has to be perfect ya know :) Thanks
Jim Tobias
10-31-2012, 1:41 PM
Something like this should work. There are a variety of hole punches that are of this design.
Jim
http://www.amazon.com/Fiskars-12-31337097-Eyelet-Setters-3-Piece/dp/B000FPYQ8M/ref=sr_1_65?s=arts-crafts&ie=UTF8&qid=1351705100&sr=1-65
Richard Temple
10-31-2012, 2:29 PM
Thanks..looks like it will work. Got me thinking.. I could always tear apart my hole puncher and use it. Then I sound a cheap hole punch set kit. Don't know why I did not think of this sooner.
http://www.amazon.com/SE-791LP-Heavy-Duty-12-Piece-Hollow/dp/B000KE17JO/ref=sr_1_10?ie=UTF8&qid=1351707500&sr=8-10&keywords=hole+punches
Something like this should work. There are a variety of hole punches that are of this design.
Jim
http://www.amazon.com/Fiskars-12-31337097-Eyelet-Setters-3-Piece/dp/B000FPYQ8M/ref=sr_1_65?s=arts-crafts&ie=UTF8&qid=1351705100&sr=1-65
Bruce Wrenn
10-31-2012, 10:12 PM
Harbor Freight will sell you a set of hollow punches, also know as gasket punches for about ten bucks. They go up through 1/2". Larger ones can be ordered from Reid Industries. I bought a 5/8" one for making shims for my dado sets.
Bill White
11-01-2012, 10:14 AM
If you're just gonna do one clock for now, go to the local shoe repair shop if ya have one. Betcha that they have just the hole punch ya need, and probably will let ya punch it right there in the shop.
Bill
Scott Donley
11-01-2012, 3:16 PM
If you happen to be a shooter ammo shells make a great punch. I fount a 22 caliber makes great holes in your belt when you need another.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.