Glen Blanchard
04-19-2005, 12:07 PM
I just bought the Beall Buff System 5 days ago and have used it a few times. All I can say is .... "WOW!!"! This system gives me the type of glassy smooth finish I have trying to achieve in vain by other methods. I am using it on a slow speed grinder as suggested.
The shortcoming of using the grinder is the relativley small surface area of application it renders. I am wondering if this system would work with some buffing pads placed on an ROS. The ROS may not have a sufficiently high rpm to do it justice, but would make it easier to cover larger areas. Wonder how easy it would be to adequately charge the pads. Anyone try this or something similar?
The shortcoming of using the grinder is the relativley small surface area of application it renders. I am wondering if this system would work with some buffing pads placed on an ROS. The ROS may not have a sufficiently high rpm to do it justice, but would make it easier to cover larger areas. Wonder how easy it would be to adequately charge the pads. Anyone try this or something similar?