Alan Lightstone
10-24-2012, 7:01 PM
Well, the conversation here talked me into installing one. Once I sorted out how to do it, the installation was quite easy. I did need to add a wood block and epoxy it onto the back of the drum assembly, and drill 5 holes (the DRO comes with the appropriate drill bits - very nice).
Seems to work very well, and should substantially speed up my work flow, which involved removing the boards and measuring them with a digital height gauge on a table.
243924243923
Overall, highly recommended.
Now onto installing ones on my combo jointer/planer and SawStop table saw.
Seems to work very well, and should substantially speed up my work flow, which involved removing the boards and measuring them with a digital height gauge on a table.
243924243923
Overall, highly recommended.
Now onto installing ones on my combo jointer/planer and SawStop table saw.