Versalaser Owners. Driver for Windows 7 ?

[James A. Wolfe]

I just got a new tube for my VLS200 and while updating the hardware, I thought I'd try to set up my laptop. I downloaded what I thought was the proper driver but could never get it to run. VS owners, what driver do you use for the Windows 7 OS?

[Mike Mackenzie]

James,

Download this driver it will work with both 32 and 64 bit

http://www.ulsinc.com/downloads/#

Note this is for the VLS 2.30 & 3.50 if you have the VL 200 / VL300 you need this driver

http://www.ulsinc.com/downloads/#

[James A. Wolfe]

Got some guidance from Universal and they got me going. I had some issues between the older firmware in my laser that needed fixing before the software worked correctly.
Jim