Kent A Bathurst
10-13-2012, 5:11 PM
I am considering trying this - mainly to get a blue color. Crushed lapis, or azurite, or something. I guess I could dye some light wood as an alternative.
However - on the crushed stone: using either epoxy or CA, will there be potential problems with wood movement under the inlay? I have literally just started toying with the idea, and fooling around with designs - but think of a multi-petal flower, that is 4" - 4-1/2" across the grain, in the direction of the wood movement. HM table top, net 1" thick, if that matters.
On the topic of dyed wood............what similar problems might I see with wood movement?
Thanks. Never done nunna this here stuff before..............
However - on the crushed stone: using either epoxy or CA, will there be potential problems with wood movement under the inlay? I have literally just started toying with the idea, and fooling around with designs - but think of a multi-petal flower, that is 4" - 4-1/2" across the grain, in the direction of the wood movement. HM table top, net 1" thick, if that matters.
On the topic of dyed wood............what similar problems might I see with wood movement?
Thanks. Never done nunna this here stuff before..............