View Full Version : Worth checking out?
John M Bailey
10-04-2012, 7:07 PM
I found this located close to me, rarely does anything worth looking at come up around here, mostly junk. I need a decent set.
http:// jonesboro.craigslist.org/tls/3316138549.html
Are these any good.
Thanks for your help.
Dick Mahany
10-04-2012, 7:24 PM
There have been many advances in tool steel since 1980. See if you can find out more on the metal composition........
Gary Max
10-04-2012, 7:54 PM
I have owned several of these Greenlee lathe tools----- nothing to write home about----- they work----- you will spent a lot of time keeping them sharp.
Gary Herrmann
10-04-2012, 7:55 PM
You can do better.
John Lifer
10-04-2012, 8:39 PM
agree with others. Maybe $5 tops each.... No better than the craftsman set I bought about that time. I still use a couple of the gouges occasionally, but other than those, not good for much.
John M Bailey
10-04-2012, 8:42 PM
Thanks for your help. I will pass on these.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.