View Full Version : A couple new projects

Martin Boekers
10-02-2012, 4:49 PM
Here is my latest board project.... I had a nice visit with Mike Null recently and passed on some
products I use. These boards displays one of those products. It's Dye Sub Hardboard stock. I get it from
Conde, but I think Johnson Plastics may sell it also. It's great stuff! It cuts easy with the laser. I did
the two shields at the top of both boards with this. First I cut to shape and size, the make the graphic
border bit bigger to alignment of the transfer easier, press and Voila!

The other piece I did was a shield of the 9th Air Force. This was used at a presentation of a Silver Star
to the family of SrA Bradley Smith who was killed in action in Afgahnistan. I was part of the volunteer crew
that was setting up the grounds for the event. Thinking the podium looked a bit bare I went back to the shop
and made the shield for the podium, making it was a nice finishing touch.

If you have a laser and dye sub check this stuff out.


Mike Null
10-02-2012, 5:17 PM

I was impressed with your results with the hardboard and had Conde send along a sample. It really looks great.

No more lunch buffets--I gained 3 pounds.

Martin Boekers
10-02-2012, 5:49 PM
No more lunch buffets--I gained 3 pounds.

I've been so busy, I lost 5, Buffets beware! ;)

Jim Good
10-03-2012, 12:49 AM
I love the hardboard. It cuts easily and leaves a nice edge. Martin, those boards look great.