View Full Version : pics of first turnings
Rich Stewart
04-16-2005, 1:48 AM
Hi everybody,
Trying to put a pic in. If it comes up this is one of my first turnings. Piece of cherry i made for my wife. I saw a thing in an article about making weed pots he called em. gonna see if it worked.
Rich Stewart
04-16-2005, 2:03 AM
That WAS easy. Ok I am gonna try to send some more now. Monday is my day off so I will be turning out on my deck. I'll get some pics of my set up.
ok fellas, don't bust your gut laughing. These are my first attempts. Like I say, I have to finish each piece on the lathe so I try to round the top and bottom so i can cut it off with the bandsaw and drill it. Drill off center quite a bit.
Rich Stewart
04-16-2005, 2:08 AM
I tried to put the two pics on one post but didn't work.
Ernie Nyvall
04-16-2005, 9:11 AM
Nice job Rich. I like all the different forms. Keep it up.
Ernie
Jeff Sudmeier
04-16-2005, 9:49 AM
Rich,
You are doing VERY well! Looks like you have a lot of different forms down pat. Great Job!
Bill Esposito
04-17-2005, 7:45 PM
Cool stuff. Be careful, before you know it you'll run out of room to put all those turnings :)
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.