Derek Cohen
09-24-2012, 9:57 AM
I built two planes yesterday, a jointer and a smoother. Let's say that they are a little different from the usual fare.
Firstly the jointer (in Jarrah) ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/3_zps562849d1.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/4_zps2be7a39c.jpg
And, secondly, the smoother (in She-oak) ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/1_zps5f2227ab.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/2_zps2dcc3d75.jpg
Both are razee designs, of which I am fond. Blades are A2. Lever cap knobs are from Lee Valley.
The obligatory smoother shavings ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/8_zps23d243ca.jpg
Views of the planes, together ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/5_zps3eee0eeb.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/6_zps92714e62.jpg
Oh yes, if you did not get it immediately, they are built around the inset planes from Lee Valley. They are even tinier than I realised. That's a 12" rule alongside the planes ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/7_zpsd0d8adf1.jpg
http://www.leevalley.com/US/wood/page.aspx?p=69857&cat=51&ap=1
Ok, I'm now off to see what I can invent around them. Ideas folks?
Regards from Perth
Derek
Firstly the jointer (in Jarrah) ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/3_zps562849d1.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/4_zps2be7a39c.jpg
And, secondly, the smoother (in She-oak) ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/1_zps5f2227ab.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/2_zps2dcc3d75.jpg
Both are razee designs, of which I am fond. Blades are A2. Lever cap knobs are from Lee Valley.
The obligatory smoother shavings ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/8_zps23d243ca.jpg
Views of the planes, together ..
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/5_zps3eee0eeb.jpg
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/6_zps92714e62.jpg
Oh yes, if you did not get it immediately, they are built around the inset planes from Lee Valley. They are even tinier than I realised. That's a 12" rule alongside the planes ...
http://i13.photobucket.com/albums/a262/Derek50/Planes/Inset%20Planes/7_zpsd0d8adf1.jpg
http://www.leevalley.com/US/wood/page.aspx?p=69857&cat=51&ap=1
Ok, I'm now off to see what I can invent around them. Ideas folks?
Regards from Perth
Derek