PDA

View Full Version : Print from Rhino?



Declan Halpin
09-20-2012, 4:10 PM
Hi all,

I'm just getting my LMI SE225CV setup. I don't have Corel Draw, but I do own Rhinoceros. I have installed it on the laser computer, but can't get it to print to the laser - it just hangs up. Anyone else done this? I assume the driver will recognize that the lines I'm printing are vectors, is that correct?

Thanks in advance,

Declan

Martin Boekers
09-20-2012, 4:31 PM
Not all lasers work with all graphics programs. You may try importing it into a word doc or PDF and see if that may work.
The is freeware called inkscape may or may not work

If you want download a trial of Corel then you can at least work with it in the interim.

Mark Sipes
09-20-2012, 4:32 PM
Did you not say the laser came with Win 95 drivers?? What Operating System are you running.. 95 or 98 ?

Declan Halpin
09-20-2012, 4:41 PM
it came with 95 and 98 drivers. Tim Jasper sent me some very recent drivers.

Also, just to add some intrigue, I was able to get one random test cut from Rhino. It was just a circle, but for some reason it did work. Subsequent circles have not gone through.....