View Full Version : Hilti drywall gun parts needed
Stephen Stark
09-18-2012, 2:52 PM
I bought a used Hilti SF 4000 with auto feeder not knowing it was an older model. It needs a new #2 Phillips head driver bit but it is discontinued in Canada. It is 6.5 inches long. The new ones are only 4.5 inches. Does anyone know of a source for older Hilti parts? Kinda screwed without a bit, no pun intended. :p Thanks Stephen
Stephen Stark
09-18-2012, 3:26 PM
241380
Here is a pic of the part I need. Thanks
Kevin Presutti
09-18-2012, 4:28 PM
Try ereplacementparts.com. Best of luck!
Kevin
Kevin Presutti
09-19-2012, 8:14 AM
Stephen,
Try this http://www.us.hilti.com/holus/page/module/product/prca_catnavigation.jsf?lang=en&nodeId=-64279
Bob Magnuson
09-19-2012, 9:58 AM
Stephen, I've been trying to find the same bit for the last month. I've called Hilti USA, they no longer make that bit and have none in stock.
There are a couple manufactures that make a 6.25" bit. I tried one, but there isn't enough adjustment in the screw feed head to make up for the 1/4" difference in length.
Jerome Stanek
09-19-2012, 11:37 AM
Can you use an apex then use a shorter tip
Stephen Stark
09-24-2012, 8:23 PM
Because of the shape of the bit and how it fits into the tool I haven't been able to find a bit holder that will fit inside the tool. I wanted to try asking on a dedicated drywall forum but I can't seem to join unless I'm a pro. Will keep looking though.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.