Cast Acrylic Engraving

[Peter Meacham]

Anyone have suggested power, speed and DPI settings using a 25w Trotec to reverse engrave some .5" Cast Acrylic please.

[Mark Sipes]

The setting in the Job Control works fine for me. 90p 40s 1000ppi at 500dpi. even 333dpi work better for color shading in graphics.

[Peter Meacham]

Thanks Mark. My old Speedy1 had recommended settings of 100 Power and 20 Speed (too deep of an engraving with that slow speed). After trying several settings, I went with 100, 50 and 500 dpi - the engravings came out nice and the customer was happy.