Peter Meacham
09-13-2012, 8:38 AM
Anyone have suggested power, speed and DPI settings using a 25w Trotec to reverse engrave some .5" Cast Acrylic please.
Mark Sipes
09-13-2012, 4:58 PM
The setting in the Job Control works fine for me. 90p 40s 1000ppi at 500dpi. even 333dpi work better for color shading in graphics.
Peter Meacham
09-15-2012, 8:56 AM
Thanks Mark. My old Speedy1 had recommended settings of 100 Power and 20 Speed (too deep of an engraving with that slow speed). After trying several settings, I went with 100, 50 and 500 dpi - the engravings came out nice and the customer was happy.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.